Installation Guides

This is your number one source for installation directions for our HID kits. Many cars will have a similar install and the concept for all installations is the same. Please keep in mind that fog lights are not necessarily plug and play and may require wire splicing to connect to the OEM harness. There also may be modification required to your fog light housing or cap. We are working on getting installation instructions specific to each car in various applications. If you have an installation write up with pictures that you would like to submit please email us at sales@sharphid.com.

These guides are strictly that, just guides. There may be variations with your vehicle which are not covered here. We are not responsible for any damage caused to your vehicle. You are to follow these guides at your own risk while assuming full responsibility. Please check with your local DMV for legal information regarding the installation of HIDs in your vehicle. You may read here for more information.

	Standard HID Wiring Diagram (jpeg) Battery Harness Wiring Diagram (jpeg) Capacitor Harness Wiring Diagram (jpeg) Complete Battery and Capacitor Harness Wiring Diagram (jpeg)
	Audi A4 1999.5-2001 (B5) (html) Audi A4 1999.5-2001 (B5) (200kb PDF)
	Audi Allroad 2.7T and 4.2 2001-2005 Fog Lights (html)
	92-02 Dodge Viper (html) 92-02 Dodge Viper (165kb PDF)
	2g DSM, 95-99 Mitsubishi Eclipse, and 95-98 Eagle Talon (362kb PDF)
	Subaru Impreza and WRX 2006-2007* Low Beam HID Conversion Installation Guide (html) *Will apply similarly to earlier models using the H7 low beam bulb type
	Volvo 850 94-97, Volvo S/V/70 98-2000, and Volvo C70 98-2004 (html) Volvo 850 94-97, Volvo S/V/70 98-2000, and Volvo C70 98-2004 (255kb PDF)
	Volvo S40 2004.5-present (1mb PDF)

Need to troubleshoot an issue? Check out our blog to post questions and find solutions and answers to problems and issues.

Don't have Adobe Acrobat? Get it here.