SharpHID - Automotive HID Xenon Conversion Lighting Products

Suzuki GSXR

35w 3000K on 06 BMW K1200 R

55w 6000K on Suzuki GSXR

DDM Slim DDM 35w HID Kit

DDM 55w HID Kit

DDM Motorcycle, ATV, SxS HID Slim Ballast Conversion Kits
Lifetime warranty and free Shipping*! REDUCED PRICES

35w single beam one bulb/ballast - $40

Bulb Type
Bulb Temperature

55w single beam one bulb/ballast - $50

Bulb Type
Bulb Temperature

35w hi/lo bi-xenon one bulb/ballast - $65

Bulb Type
Bulb Temperature

55w hi/lo bi-xenon one bulb/ballast - $75

Bulb Type
Bulb Temperature

35w single beam dual bulb/ballast - $70

Bulb Type
Bulb Temperature

55w single beam dual bulb/ballast - $85

Bulb Type
Bulb Temperature

35w hi/lo bi-xenon dual bulb/ballast - $90

Bulb Type
Bulb Temperature

55w hi/lo bi-xenon dual bulb/ballast - $110

Bulb Type
Bulb Temperature

$20 - Add shipping for Canadian residents

To order a battery harness harness with the non-hi/lo kits click here.

Not sure what bulb type or temperature you need? Click here!
55w kits are 35-40% brigther than the 35w kits.

A complete Plug & Play HID conversion kit using ultra slim ballasts designed to fit into the tightest of spaces. This kit is designed to work seamlessly with your motorcycle with little modification. All wiring is plug & play and the kit installs as though it came from the factory. The kit is easy to install and requires no splicing into the factory wires. The ballasts are waterproof and are designed to withstand the shock and vibration of being installed in your motorcycle. Adding a battery harness allows power to draw from your battery directly while keeping the system running using the OEM light switch. The battery harness is plug and play also. Shipping is free*!

The single bulb/ballast kits are for a single bulb replacement such as low beams or high beams only. If you have one bulb for low beams and one bulb for high beams and they use different bulbs and you want both of them to be upgraded to HIDs then you will need two single/bulb ballast kits. If you have one bulb per function but they are the same bulb type then you can use our two bulb/ballast kits. If you require a bulb that has both high and low beams in one bulb then you will need our hi/lo single/bulb ballast kit. If you require a two bulb/ballast kit and they both have high and low beams in the same bulb then you will need our two bulb/ballast hi/lo kit. Please also note that the hi/lo kits include the hi/lo controller harness with battery connections. This harness is designed for a kit with two ballasts/bulbs. If you are using just a single bulb/ballast kit then you will only use one side of the harness. The other side can either be cut off or tucked out of the way. The same occurs if you purchase the battery harness for your HID kit. All the harnesses are plug and play. No cutting or splicing is typically required.

These HID Xenon kits work great on any Motorcycle, ATV, SxS, or other application using a bulb type listed.

Kit Includes:
1 or 2 DDM Ultra Slim Digital HID ballast (35w = 3.5" x 2.5" x 0.5" at 8oz each)
1 or 2 HID bulb(s)
Hi/lo harness and controller with built in battery harness (included with hi/lo kits only)
Optional battery harness for non-hi/lo kits available here
Lifetime warranty

*Free shipping applies to shipping addresses in the US.